TILTA WLC-T03 Nucleus-M Wireless Follow Focus Lens Control System RONIN DJI

Description

DESCRIPTION The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button. The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 1/4 miles! This makes it ideal for drone or car-mounted shots. The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals
Ask-Photo
100% Satisfaction
Customer Feedback
Professional Seller
Camera & Photo
Money-back guarantee
Guarantee
Meike FC-100 Macro Ring Flash/Light For Canon Nikon Olympus Panasonic Pentax
25.58 USD
Yongnuo YN 50mm F/1.8 Auto Focus Standard Prime Lens for Nikon DSLR Cameras
75.00 USD
SeaFrogs 130ft Underwater Camera Housing for Canon 5D Mark III IV w/ Dome Port
720.00 USD
Godox AD200Pro Pocket Flash Light TTL 2.4GHSS Kit for Nikon Sony Canon Fuji DLSR
369.00 USD
Tilta Float Handheld Gimbal Support System for DJI RS 2 - V-Mount
1349.00 USD
VILTROX 56mm F1.4 f/1.4 AF Autofocus Lens for Canon EF-M M Mount M50 M6 M6II M10
255.00 USD
Godox LD150RS 150W RGB Led Video Light Panel Studio Fill Light +APP w/2.8M Stand
989.99 USD
Godox LD150R 150W RGB LED Video Fill Light Panel with Stand For Video Filmmaking
999.99 USD
Item Description
TILTA Nucleus-M: Wireless Follow Focus System
The Nucleus-M is a wireless 3 Channel system.
Connections between the FIZ hand unit and the two hand grips to the motors are completely wireless.
Each motor has a built-in MDR unit, saving space and setup time.
A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors.
There is no limit on the amount of motors an operator can attach per channel.
The FIZ hand unit and two handle grips have a wireless range of 1000 feet.
The signal from the FIZ hand unit can be upgraded to 1 1/4 miles with an additional accessory.
Both hand grips and FIZ hand unit run off (2) 18650 batteries. (Batteries are NOT included.)
When fully charged the batteries in the hand grips can last up to 2 days.
The batteries in the FIZ unit can last up to 10 hours.
FIZ hand unit is capable of controlling 3 channels – focus, zoom, and iris as well as overriding the hand grips.
0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm
Motors can calibrate on lenses without hard stops – such as photo-lens with follow focus gears.
Motors fit standard 15mm and 19mm Rods
Ideal for Gimbal, Drone, and Shoulder-mounted setups
Specifications:
Weight:
FIZ Hand Unit (no batteries): 0.972 lbs
Right Handle Grip (no batteries or adapters): 0.582 lbs
Left Handle Grip (no batteries or adapters): 0.529 lbs
Arri Rosette Male to Handle Grip Adapter: 0.161 lbs
Gimbal to Hand Grip Adapter: 0.099 lbs
Motor: 0.496 lbs
Motor Dimensions:
Length/Height: 11.43cm
Width: 8.26cm (end to end furthest points)
Depth: 1.59cm (rod mount section), 1.91cm (base section), 3.49cm (motor section)
Color: Gunmetal grey
Material: Aluminum-alloy, stainless steel, ABS plastic, rubber, Brazilian rosewood
Package Includes:
1 x Wireless FIZ hand unit
2 x Brushless wireless motors with 19mm rod support and 15mm rod bushings
1 x Right wireless handle
1 x Finger wheel
1 x Zoom toggle
1 x Left wireless handle
1 x Finger wheel
4 x Follow focus marking disks
1 x 74cm 7-pin to P-tap motor power cable
1 x 55cm 7-pin to 7-pin motor connection cable
1 x 18cm 7-pin to 7-pin motor connection cable
2 x Photographic lens follow focus adapters
1 x 18650 quad battery charger (batteries NOT included)
2 x Handle to Arri Standard Rosette adapters
2 x Handle to gimbal bar adapters (compatible with 25mm/30mm rod diameters)
1 x Wireless FIZ hand unit strap
1 x Hard shell waterproof safety case
6 x 18650 Battery
Payment
We accept payment from:
- PayPal (with verified and confirmed address)
Full payment must be received before shipping
Payment must be paid within 7 days after bidding. Delayed payment may result in order cancellations.
Payment Methods
PayPal
- With verified and confirmed address
- PayPal account holder must also be the receiver
- We will only ship to addresses corresponding to the PayPal payment
- No surcharge
REMINDER: If you require any additional service, please be sure to include your request with payment, we will try to help you to the best of our ability. And if possible,please also provide your phone number (country code + area code + phone number) in order to help us serve you better.
Shipping
Usually the goods will be delivered via International Post Air Mail Service after the payment has been paid in full and cleared. Please allow within 48 hours for shipment arrangement after completion of payment.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Please be noted: that the delivery time mentioned on our page is for reference only. Although the actual shipping time is punctual in most occasions, in some cases delivery time may vary due to traffic congestion, adverse weather, acts of custom inspection, etc. We will try our best to avoid such situations, however, please understand that some of these situations are beyond our control, and we are not reponsible for them.
Return
We provide 30 day return policy for products sold. If, for any reason, you are not satisfied with your purchases, full refund of the purchase (excluding the shipping expenses) can be applicable under the following circumstances:
ALL accessories must be unused; ALL accessory packages must be unopened.
ALL items must be intact and undamaged (except for defects in manufacturing).
Items must be in good conditions with all original accessories, manuals, and packing materials. Any missing parts or damaged items will result in rejection on the return.
In case of any defectives found, only defects in manufacturing are accepted as the reason of return.
No refund is given if defects are caused by misuse of buyers. Our customer service officers will gladly contact you for further arrangement upon your request.
All shipping cost thus generated is paid by the buyer.
Feedback
We maintain high standards of excellenceand strive for 100% customer satisfaction.Positive feedback is very important to us.We request that you contact us Immediately BEFORE you give us neutralor negativefeedback,so that we can satisfactorily address your concerns.
Our office hour:
-9:00a.m.-- 6:00 p.m.(GMT+8) of Monday to Friday
-And our company is closed on Weekend and Public Holiday (China)
We apologize for the late reply during the holidays! But hope that our customers give us their understanding.
About US
We are professional photography equipment seller! You will find many excellent and affordable items here!