Red DSMC2 Jetpack-SDI Expander (UPGRADED SDI VERSION) For Red Camera

Description

Red DSMC2 Jetpack-SDI Expander (UPGRADED SDI VERSION) For Red Camera
RED RAVEN WEAPON SCARLET-W DRAGON X GEMINI HELIUM RAVEN
LIQUIDATION!!! A MOVIE PROJECT IS OVER, NOW YOU CAN BENEFIT!!!
CHECK OUR IMPECCABLE FEEDBACK FOR MORE THAN 17 YEARS SELLING HIGH END PHOTOGRAPHY EQUIPMENT ON EBAY!!!
The DSMC2 Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDI output. Featuring connections for power (DC IN), SDI (3G-SDI), Gigabit Ethernet (GIG-E), AUX power, SYNC, and CTRL, the DSMC2 Jetpack-SDI Expander provides a low-profile expander solution. The 3G-SDI connection provides support for providing a signal to a remote monitoring solution, while the Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage. The DSMC2 Jetpack-SDI Expander is ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering.
The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.
The DSMC2 Jetpack Expander is also available, featuring an HDMI output and USB support for many aerial configurations.
Note: Only one (1) expander module can be used at a time.
RETAILS FOR 50 at RED
RED Digital Cinema DSMC2 Jetpack-SDI Expande Specifications
Material
Magnesium
Brain Mounting
4x M4 captive mounting screws
Brain Connections
Power delivery via WEAPON Rear pogo connector (13-Pin)
Communication via WEAPON Rear I/O connector (4x40 Pin)
Connectors
DC IN (6-Pin 1B LEMO socket)
3G-SDI output (75 Ohm BNC), 60 Hz max frame rate
Gigabit Ethernet input/output (9-Pin 0B LEMO)
Aux Power Output (2-Pin 0B LEMO), 1.5 A
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
Auto Boot On Power
2-position slider switch
Operating Temperature
0 Degree C to 40 Degree C (32 Degree F to 104 Degree F)
Storage Temperature
-20 Degree C to 50 Degree C (-4 Degree F to 122 Degree F)
Operating Humidity
0% to 85%, non-condensing
Storage Humidity
0% to 85%, non-condensing
Firmware Requirement
Compatible with all DSMC2 firmware v6.3 or later
Compatibility
WEAPON 8K S35
WEAPON 6K
EPIC-W
SCARLET-W
RAVEN
Dimensions (H x W x D)
4.57 x 3.54 x 1.46" (116 x 90 x 37 mm)
Weight
0.56 lbs (254 g)
_gsrx_vers_1292 (GS 8.3.6 (1292))