12 Volt Waterproof On/Off Switch

Description

This is a great little 12 volt waterproof on/off switch. These are the same high-quality switches that we use in our kits.
These switches can be used for any motorcycle, auto, ATV, snowmobile etc. application requiring a simple on/off function and are waterproof.
This is an inline type switch.  Even though it has two wires, it connects into the positive side only.
The rubber boot has a screw-on nut underneath so they can be installed through a hole or can be attached using double-sided tape on the bottom of the switch.
The manufacturer said this switch is rated at 15 amps at 12 volts.
However on the back of the switch it says 2 amps at 125 volts so we will go with the 2 amps to be safe.  Although, some have used these at 10 amps with no problem.
The switch is 3/4 inch long x 1/2 inch wide with a 3/8 inch thick base and 3/4 inch from bottom of base to top of rubber boot.  The two wires are about 3 1/2 inches in length.  If you are mounting through a panel, the hole would need to be 3/8 inch in diameter and the panel should be no more than about 1/16 inch.  The switch is push on, push again off.  It is not a momentary switch.  It is also an in-line switch and connects through the positive side only.
Backed by our 100% money back or replacement guarantee!  If it ever breaks or stops working for any reason you can return it for your money back or a replacement switch.  And, US shipping is free, no matter how many you order!
Track Page Views With
Auctiva's FREE Counter